Gobo projector light USES the principle of optical projection and high brightness light source to project the logo on the wall or the ground of the building, forming an image display and advertising effect with a strong visual impact. As well as new and special media forms, dynamic visual effects can well attract the attention of consumers. Logo projector is everywhere, in shopping malls, hotels, KTV, and many other places can see logo projector lights. The led projector light of fashion avant-garde, the projection screen is clearly visible, all attracting passers-by. But do you know how the projection lamp pattern you saw was made? Next, we will solve the puzzle for you!
First of all, the production staff will check the CDR file pattern made by the designer, and check whether there are any overlapping patterns and lines. After confirmation, the filling font will be black as the production path of the glass sheet. Then eliminate the unwanted pictures and retain the useful parts, and then make them on the gobo lens. The production time of the pattern film is relatively long. The production time of the simplest pictures generally takes about half an hour, while the time of complex pictures takes about four hours. The precision of the screen is high, and the screen is projected by the gobo projector light.
The material of pattern film can be divided into film sheets, iron sheets, and glass sheets.
1. Use a film sheet to make a gobo sheet. The film is printed with ink, and the ink is organic and does not withstand high temperatures. In strong light decomposition under high temperature and is easy to change color, and the projection lamp is strong light and use it produces in the process of high temperature, that is used in the lamps and lanterns is in under high temperature and strong light, after oxidation discoloration, it is easy to make films on the pale in color, maybe within a few days the patterns of the projection color quickly faded, so often want to change, very inconvenient.
2. Use an iron sheet to make patterns. Although the temperature resistance of the iron sheet is better than that of film and glass sheet, complicated pictures cannot be made. The effect is not very good!
3, glass sheet for pattern, we choose glass sheet is made of high temperature coated glass, the surface is inorganic, the pattern will not fade for ten years.No matter how hot the lamp is, there's no need to worry about changing the pattern on the glass. The light transmittance of glass slides is above 90%. The projected patterns are clear in outline, details can be clearly displayed, and the colors are gorgeous.
1. Use a film sheet to make a gobo sheet. The film is printed with ink, and the ink is organic and does not withstand high temperatures. In strong light decomposition under high temperature and is easy to change color, and the projection lamp is strong light and use it produces in the process of high temperature, that is used in the lamps and lanterns is in under high temperature and strong light, after oxidation discoloration, it is easy to make films on the pale in color, maybe within a few days the patterns of the projection color quickly faded, so often want to change, very inconvenient.
2. Use an iron sheet to make patterns. Although the temperature resistance of the iron sheet is better than that of film and glass sheet, complicated pictures cannot be made. The effect is not very good!
3, glass sheet for pattern, we choose glass sheet is made of high temperature coated glass, the surface is inorganic, the pattern will not fade for ten years.No matter how hot the lamp is, there's no need to worry about changing the pattern on the glass. The light transmittance of glass slides is above 90%. The projected patterns are clear in outline, details can be clearly displayed, and the colors are gorgeous.
The production process of led gobo projector light gobo lens
Designer drawing is regular, if the color of the designer drawing and layout do not match, it will not only lead to the increase of the working hours of the technicians who make the glass gobo but also will lead to the final projected pattern effect is not ideal. Therefore, the customer service staff will give the customer Suggestions for modification, and then ask the designer to design according to the content required by the customer one on one, so as to achieve the most ideal projection effect. After the designer had finished the design and the client agreed, we began to make the gobo lens for the client.First of all, the production staff will check the CDR file pattern made by the designer, and check whether there are any overlapping patterns and lines. After confirmation, the filling font will be black as the production path of the glass sheet. Then eliminate the unwanted pictures and retain the useful parts, and then make them on the gobo lens. The production time of the pattern film is relatively long. The production time of the simplest pictures generally takes about half an hour, while the time of complex pictures takes about four hours. The precision of the screen is high, and the screen is projected by the gobo projector light.
At present, the design pieces of the Zhengzhou Ledy led projector light can be divided into monochromatic, two-color, three-color, four-color, and full-color according to the color. Monochromatic and two-color films are relatively conventional gobo lenses, which are mainly used for conventional logo projection. Three-color and four-color films can basically meet most of the requirements, while full-color films can produce any pattern, such as portrait, landscape, and other forms. This is mainly based on your own needs to choose from.
In addition, due to its own material, glass gobo can only be monochromatic. When making multicolor pieces, it is necessary to make a single lamp piece with each color in the picture, and then overlap and stick the lamp pieces together to achieve a multicolor effect. After the lamp-making is completed, our technician will check the finished lamp-making in the last step to make sure the pictures are clear and install them on the projection lamps to check that the projection effect of each lamp-making is consistent with the pattern required by the customer.
It is difficult to make a gobo lens of gobo projector light, and each link requires professional staff to carry out the operation. If you have the need to make a glass gobo, please contact us. We have a professional team to make a glass pattern.
In addition, due to its own material, glass gobo can only be monochromatic. When making multicolor pieces, it is necessary to make a single lamp piece with each color in the picture, and then overlap and stick the lamp pieces together to achieve a multicolor effect. After the lamp-making is completed, our technician will check the finished lamp-making in the last step to make sure the pictures are clear and install them on the projection lamps to check that the projection effect of each lamp-making is consistent with the pattern required by the customer.
It is difficult to make a gobo lens of gobo projector light, and each link requires professional staff to carry out the operation. If you have the need to make a glass gobo, please contact us. We have a professional team to make a glass pattern.
